Description
Thank you for considering ‘Farmec’ for your trailer requirements, we are very pleased to be able to offer you our extensive range ‘Farmaster’ tip trailers. These trailers are capable of many years of relentless operation. We are pleased that our customers appreciate the features that we added following years of development work with our customers.
What we have aimed to achieve is:-
- A very robust trailer capable of handling all farm operations whilst maintaining the ability to be as diverse as possible
- a functional trailer that exceeds your expectation in the field.
- the long body is ideal for large quantities of bales and it has a further 1.2m extension if required
- the engineering, design and ascetics of the vehicle prove to give you maximum life and the price ensures that the unit is competitive whilst considering ‘like for like’
- that the optional equipment ensures all customer requirements are catered for
Features
The Fieldmaster range of trailers are designed for general farm use, with a fast-tipping body that goes to 60° will ensure even sticky loads will tip. Full RHS chassis with single drawbar member gives high strength and maximum turning circle. The 4-piece sides are hinged and easily removable with a tailgate that lifts off its hinges allowing the trailer to be used without the rear door, as there are corner sockets in the deck that locate the tailgate posts for securing the sides. This makes this a very diverse trailer for any operation.
A particular feature is that the headboard can lift out of its location sockets. Hay posts or bolsters can then be fitted to the 4 corner sockets making the flatbed ideal for pole transport. The hydraulic opening door opens and closes from the tractor cab. Spreading chains ensuring the right amount of material is spread.
Wheel options are either 445 / 65 x 22.5 (1174mmØ) as the optional road wheel or as standard the 500/60r x 22.5 (1176mmØ) for floatation or the 560/45R (1074mmØ) for super wide which also keeps the deck height down
Specifications
BODY TYPE : Flat floor hinged removable sides 4 piece
CAPACITY : 16 tonnes payload
CAPACITIES : 7m³ level loaded @ 2,000 kgs/m³
BODY LENGTH : 5,600mm
BODY WIDTH : 2,530mm (8’4”)
SIDE DEPTH : 525mm (21”)
LOADING HEIGHT : 1,300mm depending on wheels fitted
TIPPING : Via 18 tonne hydraulic Multistage cylinder requiring 35 litres of oil to lift to 60° and terminating at ½” QRC – 4062
1st Stage 38.4 tonnes
2nd stage 29.7 tonnes
3rd stage 22.4 tonnes
4th stage 16.1 tonnes
5th stage 10.9 tonnes
6th stage 6.5 tonnes
WHEELS : 500/60r x 22.5 (18,800kgs@40km/hr) diameter 1076mm
TANDEM AXLE : 90mm / 8 stud axles (23,000kgs @ 40km/hr)
BRAKES : fitted as standard with 4 x actuators to tractor brake pedal as standard
DRAWBAR : 250 x 100 x 9mm fabricated single beam drawbar
CHASSIS : 250 x 100 x 9mm fully welded
TOP CHASSIS : 200 x 100 x 9mm RHS
HEADBOARD : Removeable with corner sockets – RHS top shock rail and extension rail
SIDES : Detachable hinging sides that bolt in rigid, allowing easy access to side loading, RHS top shock rail to prevent damage. There are 2 removable panels per side held together with a centre deck staunchen.
TAILGATE : Top hinged tailgate with RHS top shock rail includes independent corner posts to allow rear door to be removed yet sides remain fixed.
TAILGATE LOCKING : Hydraulic trip back door operated from a double acting remote in the tractor cab
ROPE RAILS : Fitted with 1” bore pipe attached nominally
FLOOR THICKNESS : 4mm Corten braced every 400mm (6mm mild equivalent
SIDE THICKNESS : Pressed 3mm Corten 350G with up right bracing
ROAD LIGHTS : Optional rear road light embedded in rear cross member
DRAW BAR : Spring drawbar as requested
DRAWBAR SUPPORT : Fitted with 80mm jack support
TOW EYE : Swivel 50mm eye as standard
FINISH : Blasted, zinc base primer, 2 x gloss coats
COLOUR : Standard Yellow with door /wheels silver
