2 Bale Trailing Feeder ‘RS2-HL’

Features

• The RS2 only comes with the higher spec loading forks that pierce the bale – this is essential when feeding squares. The loading fork frame assembly is mounted to a huge quality hydraulic cylinder which allows for all tractors to load heavy bales. The forks then load the second bale to be transported – hence a 2-Bale Trailing Feeder.
• We have added a variable height tow-eye which ensures that the loading tines get the optimum angle under the bale, so the tractor drawbar height won’t matter. The ‘A’ frame drawbar gives massive strength and ensures there’s no cracking even after thousands of bales. Fitted with a 70mm jack stand for the operator to attach with (landing leg is optional).
• The 2” pitch chain with welded RHS floor bar not only facilitates bi-directional feed, but it also allows for smooth running and a low torque requirement to drive and allows for feeding off either side which is ideal on hilly country or for rota cut bales that fall to pieces. With 6,800lbs of break strength this chain has certainly proven its worth.
• All drives consist of 40mm bearings and full-length 40mmØ medium tensile shafts, whilst the fully welded chassis 125 x 75 x 5mm section RHS is the basis of the heavy-duty construction.
• All Farmec feeders are bi-directional feed, so unlike with other brands you can feed on either side on the machine.
• Non rust 1.6mm Corten 350G steel floor with 4 x rub bars complements the design. As do features such as 2 wire hoses, high torque American Parker hydraulic motor, large axle and floatation wheels.