$16,008
The model shown has the rota shredder fitted to both sides which has been popular for many years so this model even though lacking in popularity is still available to customers that enjoy the symmetry of being able replicate a row density when bi-directional feeding of sheep or deer. The rotas are geared higher by 25% so have a teasing effect on the bale which also reduces selective feeding and reduces waste.
Here’s one of our linkage feeders in action.
Thank you for considering Farmec for your bale feed-out requirements. With an extensive 5 models to choose from these feeders are ready for the arduous work ahead with features that will give you peace of mind for years to come. Sold for over 40-year duration they certainly have lasted the task…
All Farmec feeders are bi-directional feed, so unlike other brands you are able to feed on either side on the machine, with either fast un-rolling with the roll or slower teasing against the roll.
►Floor chains are heavy duty 2” pitch as standard, this is 6,800lbs breaking strain which is better than a lot of the 3” and as well as increased strength and has a very competitive replacement cost it also reduces motor torque requirements.
►Self-loading forks which easily fit to the tractor link arms via the double lug jaws with Cat II pins, these are conus machined 60mm solid bar with one tine 100mm longer than the other for ease of aligning.
►The heavy duty hi-torque American hydraulic motor ensures that every bale will be fed out. The motor connects via the self-meshing heavy duty drive dogs allowing for quick attachment (there is no need to get off the tractor seat).
►The rota shredders running at 25% increase is an ideal feature especially when feeding tight bales or straw and hay.
CAPACITIES : 1 bale
CHAMBER TYPE : Twin shredder
BALE TYPES : Round bales / chopped bales chopped or long cut
FEED TYPES : Silage-Hay-Straw anything
CHASSIS : Fully welded RHS
FLOOR : Full steel floor 1.6m Corten non rust 350G
LOADING : Via 3-point linkage mounted tines 60mm Ø 1040G
FLOOR CHAIN : 2” pitch 4 peined with welded bars and 50mm spikes – with 6,800lbs breaking each chain
OIL REQUIREMENT : Minimum of 32 litres /minute – Parker TG530 motor
HYDRAULIC REQUIREMENTS : 1 x double acting
SHIPPING SPEC : Length 2.3m x Width 2.0m Height 1.0m (packed)
TARE WEIGHT : 760kgs
Farmec 2 bale trailing feeder ‘R2-2’
